Ceiling and wall milling

The wall milling machine ARTIC DF-1700 is a very practical machine when it comes to surfaces on the wall. The chassis is positioned by hand on the wall to be worked on and lightly pressed on. The milling head adapts to the surface precisely, and the operator can automatically move the milling head up and down using a rocker switch. The milling speed can of course be adjusted with a potentiometer. The milling depth 0-12mm is preset via the milling visor. Thanks to the patent pending flap, it is possible to mill in both directions. The milling head can be rotated 360 degrees, so you can work very close to the ceiling and the floor.

Milling	130 mm
Milling depth	0–12 mm
Max. Height	2.7 m
Motor power	2.0 kW
Speed	9500 U/min
Connection	220 V/50 Hz
suction connection	75 mm

The ARTIC DF-3500 ceiling milling machine is a very practical machine when it comes to machining ceilings. The chassis is preset to the corresponding ceiling height and the operator can push the chassis back and forth in an upright position. In this way, the surface is cleanly removed lane by lane. The milling depth 0-12mm is preset via the milling visor. Thanks to the patent pending flap, it is possible to mill in both directions. Area outputs of up to 12m2 per hour are possible! In addition, a grinding head with a cup wheel can be installed for removing thin surfaces or paint coats.

Milling	130 mm
Milling depth	0–12 mm
grinding	180 mm (Pinky)
Max. Height	3 m
Motor power	2.0 kW
Speed	9500 U/min
Connection	220 V/50 Hz
suction connection	75 mm